Do I Need Chinking?

Chinking for log homes can be used for aesthetic reasons or can be done to ensure the elements stay outside. Some homeowners like the look of chinking while others do not want to see any chinking on their home. Chinking can be installed by professionals or homeowners. It takes a lot of patience, time and energy to get the job done properly. Below you will find coverage rates, installation tips and available colors.

Available Chinking Colors:
Buff, Tan, White White, Mortar White, Woodtone Cedar, Light Gray, Khaki and Pecan

Chinking Installation Tips:

1. Start with dry logs. Their moisture content should be below 20%.
2. Apply log stains before installing the chinking material.
3. Clean your logs prior to applying any chinking material. Any loose debris, dirt, dust or grease could adversely affect the adhesion of your chinking.
4. Install backer rod before applying any chinking products. Backer rod is available in closed cell and open cell forms.
5. Select a chinking material that is going to be compatible with your log home stain. If you are unsure about the compatibility of your log chinking and your log home stain then speak with the manufacturers of both products.
6. Do not apply Log Jam or Chinker’s Edge in direct sunlight. This could lead to blisters in the material.
7. Apply 2 to 3 feet of material at a time and then work the material with a foam brush or trowel.
8. Use a spray bottle to mist the chinking if it dries too quickly.
9. Do not get Log Jam or Chinker’s Edge too wet because it will become more difficult to tool.
10. Clean as you go. Soap and water can be used if the material has not dried.
11. Chinking should be installed to a depth of at least a 1/4” and no more than 1/2”.
12. Have fun and remember that the more chinking that you install the better you will become at applying it.

Coverage Rates per 5 Gallon Bucket of Chinking:
½” x 1” Wide Chinking Joint= 195 Lineal Feet
½” x 2” Wide Chinking Joint= 95 Lineal Feet
½” x 3” Wide Chinking Joint= 65 Lineal Feet
½” x 4” Wide Chinking Joint= 45 Lineal Feet

Product Coverage Rates per Case of 29oz Tubes of Chinking:
¼” x ½” Wide Chinking Joint= 308 Lineal Feet
¼” x ¾” Wide Chinking Joint= 231 Lineal Feet
½” x 1” Wide Chinking Joint= 154 Lineal Feet

For more information about chinking material, product warranties, application tools or contractor referrals contact Mountain Home Building Products toll free at 800-490-3695.

Log home maintenance is something that is a continual project for most log home owners. Typically, it is confined to reapplying log stains and applying a little caulking or chinking material. Log home maintenance does not have to be a headache if you set up a maintenance program. Below you will find some helpful tips for maintaining your log home.

1. Walk around the perimeter of your log home once a year.
2. Look to see if you have any new checks that need to be filled with caulking material.
3. Examine any high moisture areas for possible water damage. If rot is present use a wood restoration product to remedy the situation.
4. Look for any small holes created from wood boring insects. Check with Mountain Home Building Products in regards to fixing this type of problem.
5. Look to see whether your log stain is faded.
6. Lightly clean your wood before applying more stain material. The idea is to remove any dirt, dust or debris from the surface of your wood. The new stain material will only be as good as the surface that it adheres to.
7. It is best to use the same stain that was originally applied to your log home. Switching stains is possible but make sure that the new stain is compatible with the old stain material.
8. Use a quality log home stain. I recommend a product called Transformation from Sashco. The better the stain material, the less maintenance your logs will require.
9. Log home stains should last about 3 years on the southern exposure of your log home and 4-5 years on the other sides of your home. The better surface preparation you do, the longer your log home stain will last.
10. Fill all checks and cracks that are a 1/4” or greater. This will prevent any water or bugs from getting in your home.
11. Look for any tears in your chinking. This material can happen from a poor initial application of chinking or excessive movement in your wood. Fixing the torn chinking can be as easy as re-applying more chinking material to the existing chinking. Most chinking materials adhere to themselves.

In conclusion, the more you stay on top of your log home maintenance, the easier and cost effective it will be. For more information about log home maintenance, chinking or log home stains contact Mountain Home Building Products at 800-490-3695. Mountain Home Building Products is a leading distributor of chinking, log home stains, log caulking, clear wood finishes, log siding, house logs & rustic lighting.